Full Guide to Enable Linksys Router Guest WiFi Network Feature

Nobody likes it when guests visit. Not just because they have a habit of gossiping but also because of their constant need to access the network of the Linksys wireless router. Are you also frustrated because your guests want to access your Linksys Router Guest WiFi and you are worried about its safety? Well, I understand what you are going through because I went through the same thing once. What comforted me was the guest network feature provided by Linksys. You should also enable this feature on your device by accessing the Linksys router login page. That way you will be able to provide your WiFi password to your guests and keep them away from your main network at the same time.

How to Set Up Linksys Router Guest WiFi?

  • Start the process by plugging your Linksys router into a non-damaged socket.
  • Switch on the power button.
  • Hold on for some time.
  • Make a hardwired connection between your router as well as the modem.
  • Gain access to your computer and open up your favorite browser.
  • Your internet browser should be up-to-date. Also, its cache ought to be cleared.
  • Go to the address bar of your browser.
  • Thereafter, enter the default web address.
  • Hit Enter.
  • Once the Linksys router login page appears input the default login credentials.
  • Click the Log In button.
  • On the Linksys extender setup wizard, go to Settings.
  • Click the Wireless tab and then the Guest Access option.
  • Select the Yes option.
  • Click Save Settings.

Within some time, the guest network feature will successfully get enabled on your Linksys wireless router. Now, you are free to share the password of your WiFi with your guests.

What happened? You can’t do that because you were not successful with the process? Well, that is unfortunate. Follow the troubleshooting hacks mentioned below.

Can’t Set Up Linksys Router Guest WiFi?

Reboot Your Linksys Router

If you haven’t tried this hack, then what are you waiting for? Do the honors now! Wondering how to reboot your Linksys wireless router? Well, it is simple. All you need to do is, take the help of the following steps:

  • Disconnect the power cable connected to your Linksys router.
  • Hold on for some time.
  • Thereafter, reconnect the cable to your router and turn it on.

Now, check whether you are able to enable guest network on your Linksys router. Still, got no luck? No problem. We still have a couple of hacks that might be of some use to you.

Verify the Ethernet Connection

The Ethernet cable using which you have established a connection between your router and the modem should not have any damage. On the off chance, it does, then now you are aware of the one more reason causing the cant enable the guest network feature issue.

Therefore, in order to troubleshoot it, we recommend that you bring a new cable home. If doing so does not seem right, then connect your devices wirelessly.

Pull Your WiFi Devices Closer

Apart from maintaining a secure connection between your Linksys router and the modem, keeping them close is important. Therefore, make sure that both your devices are placed in the same area or room.

However, keep in mind that they should not kept way too close, or else, their signals might their foreheads and cause further technical issues in the future.

Perform Linksys Firmware Upgrade

If none of the above-mentioned hacks helped you troubleshoot the can’t enable the guest network feature issue, then it is probably because of an outdated firmware.

You are free to use the Manual method as well as the Linksys application to update the firmware of your device to its latest version. The choice is yours.

In Conclusion

With pride, we are wrapping our guide on how to enable the guest network feature on a Linksys wireless router. We hope that the steps mentioned above helped you go about the process with ease.

In case you have performed Linksys WiFi extender setup in your home and want to enable the same feature on it, then the same steps can be followed.

Whether this article was able to help you enable the guest network feature or not, do share your feedback by dropping a comment in the section below.

Related Articles

Check Also
  • Technology8 Reasons Why You Need a Case Protector for Your Apple Watch
    8 Reasons Why You Need a Case Protector for Your Apple Watch
Back to top button